Ring profiles

When selecting and designing a ring, it is worth considering in the first place what kind of cross-sectioned ring, in other words, what profiled ring you feel comfortable for your ring.
This may vary from person to person. For this, it is worth trying as many models as possible. The thickness and width of the rings are also an important factors. Here are some practical observations that I have been able to gain during my more than ten years of experience in the ring making business:

The longer the fingers are, the better the broad/wide ring suits (Ladies can optically lengthen their fingers with a suitable manicure or artificial nail.)

-The more color the ring is made up of, the smaller/narrower it will appear. For example, if we put a 6mm wide white ring and a three-pair ring-shaped multicolored ring next to each other (which is also size 6), the solid-color has a much wider effect.

-Comfort-fit design is recommended only for wide rings, as the narrow, inside convexed rings can turn diagonally on the fingers.

-The outside straight rings are more modern and give younger, look while outside convex ones are more traditional rings

-The more convexed the ring is, the more it thickens and strengthens, optically the wearer's finger.

-The thickness of the rings should be determined at least 1.5-2 mm because the thinner rings can easily deform and if you gain a few pounds, it can not easily be expanded.

 

Mihalovits Manufaktúra ékszerkészítés

Contact us

  • András Mihalovits Jeweller
  • Address: 1238 Budapest, Hungary
  • Street: Láng Endre 45.
  • Telephone: +36 1 286 08 94
  • Mobil: +36 20 270 7777
  • Email: iroda@mihalovitsmanufaktura.hu
  • Tax: 63370786-2-43
 
 Hungarian Jewelry